Membrana lichida de etansare, armata si pulverizabila airless Blowerproof Liquid 10kg

Polimerul pe bază de apă este aplicat prin pulverizare pentru a crea o etanșare continuă neîntreruptă pentru aer și vapori, pe o gamă largă de suprafețe și pentru imbinări podea / perete sau îmbinări perete / tavan precum și conexiuni la acoperiș.

PRIOR TO STARTING THE APPLICATION
» Remove salt efflorescence, dust, loose parts and standing water from the surface.
» Fill holes and joints with BLOWERPROOF GAP FILLING MORTAR or similar fast setting cement based
product or polyurethane foam; Apply BLOWERPROOF LIQUID BRUSH on holes and joints < 5mm.
» Do not apply BLOWERPROOF LIQUID at T< 5°C (also substrate temperature)
» Application on humid surfaces is allowed, but remove standing water.
APPLICATION
» BLOWERPROOF LIQUID SPRAY is ready-to-use; mix with hand mixer before application. Do not dilute
with water or solvents.
» Apply with an airless paint spray device.
» Cleaning airless device: with water.
» Apply BLOWERPROOF LIQUID SPRAY in two layers, at a total consumption of 0.5 – 1 kg/m².
» Complete drying is requested prior to applying another product on BLOWERPROOF LIQUID SPRAY (such
as plaster). Drying time may vary and depends on local conditions and condition of the substrate.
Indicative: 24 – 48 hours.