Octapeel liquid foil, interior-exterior, 27 x 20 kg pallet, free airless pump!

Disponibil: in stock

28.051 92 Lei

Cantitate

Beneficii

🎉 Special Promotion – Now Only! 🎉
When you purchase a pallet of interior-exterior liquid protection film (27 x 20 kg), you receive an Airless pump for FREE! 💥
🔹 What you get:
• 1 pallet of liquid protection film — 27 buckets x 20 kg
• FREE Airless pump for fast and efficient application
👌 Ideal for:
✔ renovation and construction works
✔ waterproof protection for facades, terraces, foundations, and balconies
✔ durable and high-quality finishes
📦 Limited offer! Take advantage of this offer now before it ends 😊

🎉 Special Offer – Only Now! 🎉
When you buy a pallet of interior-exterior liquid protective film (27 x 20 kg), you get an Airless pump FREE! 💥

🔹 What you get:
• 1 pallet of liquid protective film — 27 buckets x 20 kg
• FREE Airless pump for quick and efficient application.

OCTAPEEL – transparent, elastic, and easy-to-remove temporary protective layer

General Description

OCTAPEEL is a water-based component made from a 100% recycled polymer emulsion and recyclable at the end of its use cycle. After application, it forms a durable, transparent, and elastic layer that is easily removed from the surface once dry.

The product is designed to protect surfaces against almost all types of pollution, including paint, markers, graffiti, or debris. It is a practical solution when you want to keep surfaces clean during work.

OCTAPEEL was specially developed for window protection, especially on construction sites, during finishing works. However, it can also be used as a temporary protective layer for spray booths or in many other similar applications.

Key Benefits

Forms a transparent and elastic film after drying
Durable layer, easy to remove in one piece
Resistant to pollution: paint, markers, graffiti, debris
Suitable for porous and non-porous surfaces (e.g., glass, plastic, frames, facades)
Ideal for temporary protection of windows on construction sites and spray booths
Water-based, made from 100% recycled polymer and recyclable after use

Features and Specifications

Feature	Detail
Base	Water-based
Composition	100% recycled polymer emulsion (recyclable after use)
Appearance after drying	Transparent, elastic, durable layer
Application	Minimum 2 coats; second coat transverse over the first
Minimum recommended consumption	0.2 – 0.6 kg/m²
Drying	4 – 24 hours (depending on ambient temperature and film thickness)
Recommended nozzles	Flat tips type 517 – 519 (0.015 – 0.019 inch) for airless spraying

OCTAPEEL can be used on multiple types of porous or non-porous surfaces, such as glass, plastic, window frames, facades, etc. The uses are practically limitless in the context of temporary surface protection.

How to use the product

Use masking tape to protect areas that should not be covered (e.g., ventilation system, guide rails, sun protection, etc.).
Apply OCTAPEEL in a minimum of two coats, using 390 Classic, STR-595, 695, ST MAX II 595 PC PRO pumps.
Apply the second coat transversely over the first and adhere to the minimum consumption of 0.2 – 0.6 kg/m². A too-thin layer can result in a difficult-to-remove coating.
After the OCTAPEEL film has fulfilled its purpose, easily remove it in one piece by firmly pulling it from the covered surface.

Practical Information

Do not dilute or mix with other products.
Do not apply in rainy conditions or if rain or frost is expected within 12 hours of application.
On porous surfaces, it may adhere better than on smooth, hard surfaces; apply a very thick layer on porous surfaces (> 0.6 kg/m²) or apply a second layer.
Apply by airless spraying with flat tips type 517 – 519 (0.015 – 0.019 inch).
After use, clean equipment with an alkaline solution.
Do not apply on untreated wood or very absorbent masonry.
Upon long-term contact with water, the film may turn white and opaque, without affecting the product's performance or coverage.
Homogenize before use.

Order OCTAPEEL now and enjoy durable temporary protection and easy removal after drying.

The product is packed in a metal box for safe transport!

1. The standard application rate is 0.25 kg/m2. Depending on the surface, consumption may vary between 0.2 – 0.3 kg/m2.

2. Consumption below 0.2 kg/m2 reduces the product's protective and exfoliating capacity.

FEATURES

• UV resistant;

• Transparent;

• Solventfree;

• Frost resistant after application;

• Removes without leaving residue;

• Resistant to paint, graffiti and ink;

• Resistant to mechanical actions, dirt or debris, etc.